Tag: Crystal Industrial

General Description

Crystal Industrial’s Chemical injection quills from India, used to ensure that chemicals are uniformly disseminated into the focal point of a pipeline. The body and stinger are both built of chemical tolerant plastics or alloys (PVC, Kynar, 316 SS, or Hastelloy C-276). Every unit comes finished with a built-in extractable spring loaded ball check to avert flow of the infused chemical into the primary flow when the system is closed down. Crystal Industrial’s Injection quills with stinger lengths of 3″ and 5″ are accessible. All injection quills accompany FNPT x MNPT fittings for simplicity of establishment.

The standard quill has no check valve and is ordinarily utilized with applications that need higher circulation. They are additionally used as a part of applications that don’t need a check valve or utilizations that require an exterior check valve.

The injection quills have inbuilt ball check valves to avert reverse flow through the nozzle and into the chemical feed line.

There are two even surfaces on the exterior of the nozzle so that a wrench can be utilized while establishment of the injection quill.

Place the Crystal Industrial’s injection quill from India with telltale V notch facing into the stream for quick distribution of infused chemicals into the flow, there is a witness stamp to distinguish the long end of the quill so establishment is correct.

Standard quill length is 2 ¾” but customized lengths up to 24″ are accessible. For bigger lengths please add the quill length required to the end of the Crystal Industrial’s part number.

The angle at which a quill or corporation stop is implanted into a pipe to insert chemical is essential for effortless and effective chemical feed. The placement of the quill is additionally essential (i.e., whether the 45° angled end faces upwards or downwards).

Injection Quill into Liquid Stream

When positioning Crystal Industrial’s injection quill into a horizontal fluid stream, it must be instilled in the 6 o’clock position and at least 3 feet or 8 pipe diameters upward from any elbow or curve. The 45° angled end should be oriented downstream. The end of the injection quill must be in the middle of the stream or at least 2 inches from the base of the pipe for bigger pipes.

Injection Quill into a Vapor Stream

When placing Crystal Industrial’s injection quill into a horizontal vapor stream, it must be set up in the 12o’clock, 3 o’clock, or 9 o’clock position and at least 3 feet or 8 pipe diameters upward of any elbow or curve. The 45° angled end should confront upstream.

Vertical Piping

When managing vertical pipeline, the point of establishment does not make a difference (e.g., 12 o’clock, 4 o’clock). The placement of the injection quill does still matter (e.g., 45° angled end confronting upstream or downstream).

Crystal Industrial’s injection quills from India are intended to ascertain that chemical feed systems infuse into the focal point of an operative stream for better mixing and to avert erosion along the process pipeline. The check valve keeps the process liquid from reverse flow up the chemical line. Strong structure assures reliability in the stringent service of municipal and mechanical applications.

Crystal Industrial’s Injection Quill Features:

• High reliability at less expense.
• Strong, machined construction.
• Sizes from 1/2″ to 2″ NPT or BSPT, or DN 15 to DN 50.
• Pressures up to 3000 psi (207 bar).
• Built-in check valve (standard).
• Numerous check ball alternatives (SS, PTFE, Hastelloy® C).
• Hastelloy® C spring (standard).
• Numerous tip configurations (45° standard).
• Extensive variety of wetted materials.
• Seal options include EPDM and FKM (Viton®).

Utilizing Crystal Industrial’s injection quills from India to diffuse product uniformly through lines or vessels incredibly enhances product performance. Crystal Industrial’s retractable and fixed injection quills from India are accessible in a range of corrosion tolerant alloys, can be fitted with special tips to give maximum coverage and can be modified for particular applications.

Crystal Industrial’s Injection Quills from India

A variety of chemical injection valves intended to give chemical distribution far from pipe sidewall, enhances blending and helps to decrease pipeline corrosion. Accessible in many styles with four body materials, PVC, polypropylene, PVDF and 316 stainless steel.

Description
Crystal Industrial’s injection quills are intended to infuse chemical into the middle stream of process to give a more homogeneous blend in the pipeline.

• Accessible in PVC, PP, PVDF and 316 SS.
• Two sizes: 6″ and 8″.
• In-built spring loaded check valve.
• 1/4″ orifice for greater flow capacity.
• Stainless steel spring as standard, Hastelloy “C” accessible as an alternative.
• Pressure rating to 3000 PSI (316 SS).
• Temperatures to 260ºC (316 SS).
  

  Crystal Industrial’s Stainless Steel Injection Quills from India

  Description
  A variety of stainless steel injection quills in standard, retractable and thermal sink versions. All incorporate shut off valve, non return valve and acknowledge standard LMI injection valve.

Infuse Quills for safe conveyance of chemicals into pipelines

Crystal Industrial’s Injection Quills from India are utilized to give safe transfer of chemicals into pipelines. The quill end assures the distribution of the chemicals far from the pipe sidewall. The built-in spring loaded check valve keeps reverse flow from the pressurized pipe if there is a crack in the discharge piping. A joined fitting on the inlet permits simplicity of establishment and upkeep.

Alternatives and Benefits:

Crystal Industrial’s Injection quill from India can likewise be arranged for use as an in-line check valve.

• Accessible in PVC, CPVC, PVDF, PP, 316 stainless steel, and various materials upon demand.
• Extractable check valve seat.
• Union inlet w/Viton o-ring.
• Alternative EPDM o-ring accessible.
• Standard maximum pressures to 150 PSI.
• Temperatures upto 500º F.
• Inlet tubing connector alternatives accessible.
• NPT or BSP process fittings accessible.
• Quill sizes: 0.5-2″.
• 4″ quill length standard with adders up to 8.5″.
• Three materials of manufacture are accessible to give congeniality with majority of chemicals.
• Elongated versions accessible for bigger diameter pipings up to 36 inches.
• Disseminates chemical product into fluid, gas, or mixed streams.
• Decreases contact of concentrated chemicals with pipe or tank surfaces.

Crystal Industrial’s injection quill from India is utilized to equally distribute fluid chemicals into pipelines. At the point when appropriately established, Crystal Industrial’s injection quill from India inserts the chemical treatment into the bulk of the liquid, avoiding probable localized corrosion or disintegration.

The standard length Crystal Industrial’s injection quills from India are made for pipings of 6 inch diameter or less. Ordinarily the augmented Crystal Industrial’s injection quills from India are field cut to place the stinger in the focal point of the pipeline and might be slotted for steam or gas streams.

Crystal Industrial’s injection quills from India are made for improved corrosion tolerance and mechanical power when inserting corrosive products, for example, concentrated sulfuric corrosive, which releases heat when diluted.

Highest Pressure: 3,000 psi, 150 psi for Kynar.
Highest Temperature: 500ºF metal, 200ºF Kynar.

Crystal Industrial’s injection quills from India are utilized to infuse a chemical product in a stream. By reaching the focal point of the stream, injection quills ensure a consistent and effective mixing of the components.

Crystal Industrial’s Low pressure Access Fitting Assembly from India

It comprises a sequence of two nipples, a 1″ ball valve, a stuffing box with sealing gland, and a mechanical bolt to protect the probe while being used. A nipple and the ball valve are joined to the pressure system permanently by method of the nipple mating with a suitable 1″ Threadolet outlet. The stuffing box and bolt nut includes packing set and shaft packing, which when compacted by the locking nut, safely bolts the probe/holder.

Crystal Industrial’s 1″ Low Pressure Retractable Injection Tube from India

Descriptions

• Mounting — 1″ Full Port Valve Minimum.
• Temperature Rating — +500° F/+260° C.
• Pressure Rating — 1500 PSI.
• Tube Material – 316SS.
• Seal Material – Teflon.

The Crystal Industrial’s 1″ low pressure retractable Injection system from India is configured for low pressures and average temperatures of up to 1500psi and 230ºC, utilizing a minimal one inch piping/vessel outlet. Where the access system needs comparatively few observation points, this system gives a financially viable option to Crystal Industrial’s higher pressure system. Like the higher ranked system, the Crystal Industrial’s Model 600 from India allows secured, simple transfusion and withdrawal of different corrosion and abrasion checking gadgets and in addition preventive upkeep type gadgets – all while under line working pressure. A retractor operated with hand is needed for secured control of the probe. An entire line of apparatus of corrosion and abrasion checking is accessible.

Make certain to choose and request a suitably measured Threadolet as per the pipe size. Crystal Industrial’s Flanged Threadolet from India are accessible on special request and in addition the 1″ flanged ball valve and flanged stuffing box. Crystal Industrial’s Injection / Sampling Assemblies from India give a retractable method for chemical insertion or process liquid sampling at compression up to 1500 psi and temperatures up to 260°C. Inclusion of tube can be adapted to allow insertion / sampling at exactly the desired location with the process liquid.

Standardized lengths are accessible in 18, 24, 30 and 36 inches. The 1/2″ female NPT on the operative side of the injection tube permits you to place a quill or select from different nozzle designs to meet your injection necessities.

Crystal Industrial’s PVC and CPVC Injection Quills from India

Crystal Industrial’s PVC and CPVC Injection Quills from India give extensive chemical compatibility for various water and industrial chemical utilizations. These quills can be utilized with most acidic and base solutions, and numerous chemicals comprising chlorine and ammonia.

PVC is a very good all-around material up to roughly 130°F.

CPVC can give considerable similar properties as PVC up to around 180°F. Under a few conditions, CPVC can become weak as it ages, so PVC is suggested unless higher temperatures are existing.
Utmost pressure: 150 psi

Crystal Industrial’s Kynar Injection Quills from India

Kynar gives very good chemical resistivity properties up to around 225°F.
Utmost pressure: 150 psi

Advantages

Crystal Industrial’s quills from India are manually insertable (low compression) or mechanically injectable (high compression) into your pressurized system. With an extensive variety of weight evaluations accessible, Crystal Industrial’s quills from India are the ideal selection for checking and securing most pressurized applications. They can be set up in any location with elongated injection lengths of up to 20 feet for difficult to access application circumstances. Crystal Industrial’s STV-T Series injection instruments are utilized for mechanically implanting the quill shafts.

Features

• Process pressure bleeder valve.
• Licensed fastening collet securely protects the shaft inside the process flow until discharged by the administrator.
• Incorporated security top or chain, contingent upon model.
• 45-degree angle with crosscut face.
• Configured and fabricated as per ASME B31.3.
• Process wetted parts abide by NACE MR0175/2009 and are appropriate for service in hydrogen sulfide (H2S) atmospheres.

Crystal Industrial’s High caliber and Reliable Injection Quills from India

Crystal Industrial from India stock a variety of injection and quills that can be securely and effectively set up on any water main.

Types of Injection quills offered by Crystal Industrial from India

Crystal Industrial’s Retractable Chemical Injection Quills from India (150 psi and 250 psi)

These quills are composed and built for bigger widths and high speed pipings and water mains. No close down of water main or pipage needed when affixed to a flanged valve. It permits the client to evacuate and inject the quill while under pressure of up to 250 psi.

Crystal Industrial’s all PVC Retractable Chemical Injection Quills from India (150 psi)

-Most appropriate for infusing corrosive solutions. They are lightweight, durable and simple to use.

Crystal Industrial’s Non-Retractable Injection Quills from India (150 psi)

-Appropriate for infusing lesser quantities of chemical solutions into pipeline systems and water mains. NPT attachments make the establishment procedure simple to manage.

Crystal Industrial’s chemical injection quills and diffusers from India are made for water and wastewater chemical feed systems, built for security and reliability for every application.

Crystal Industrial’s Chemical Injection Systems that get Optimal Results. Crystal Industrial’s high caliber injectors from India are ideal for infusing a chemical solution into a compressed water main or operative pipage system. Choices include: retractable or non retractable, an extensive variety of materials and sizes for compressions up to 103 Bar and to assure all chemical compatibilities and BSP, NPT and flanged fittings.

Crystal Industrial’s product portfolio incorporates an entire line of retractable injection quills, injection atomizers, coupon holders, electrical resistance (ER) probes, and retractor systems.

In comparison to other solution providers, our items surpass the rest with inherent attributes for security of the administrator and ease-of-use even in extremely high pressure surroundings. Crystal Industrial’s piping integrity product line from India aids to maintain security, resource integrity and quality measures.

Application

Crystal Industrial’s Retractable injection quills from India are made for on-line withdrawal and are extensively used in the Oil and Gas enterprises. These quills are withdrawn online routinely. Crystal Industrial’s retractable injectors from India permit injector infusion or evacuation without interfering with the primary procedure in the pipeline.

Features

• Patented aspirator tip outline on injector diffuses chemical equally into process flow and far from pipe sidewalls.
• Crystal Industrial’s Ball valve assembly from India seperates piping from injector assembly when injection is not needed.
• Compression seal keeps the assembly from reverse pressure.
• Security line keeps the injector assembly from being totally removed and shields against blowout.
• Standardized ball valve assemblies accessible in 316 Stainless Steel, Alloy 20, CPVC and Brass. Standardized Injector Nozzle assemblies accessible in 316 Stainless Steel, Hastelloy C-276 and CPVC.
• Ball-check material in 316 Stainless Steel injectors is 316 Stainless Steel and ball-check material in CPVC and Hastelloy injectors is ceramic.
• Ball-check spring material in 316 Stainless Steel and CPVC injectors is Inconel. Ball-check spring material in Hastelloy injectors is Hastelloy.
• Alternative spring loaded check valve accessible. Check valve accessible with body bleed valve.
• Standardized Retractable Injector chemical feed port is 1/2″ NPT. Operational connection is 3/4″ NPT.

The access fitting assembly, tube/quill, nozzle and valve are altogether produced from stainless steel. Other materials/configurations are accessible to meet the descriptions of almost any application. The tube/quill is fabricated with an incorporated blowout-preventor as an extra protection.

Standardized assemblies are made for fixing through a 1″ thread-o-let, weld-o-let or flanged connection, however different sizes are accessible upon demand.

Crystal Industrial’s Dual Port Injection Quill from India

These dual port chemical injection quills are specifically intended to assure a more even and quick diffusion of TWO chemical infusions into one port. This permits the chemicals to be inserted close to the focal point of the operative stream pipe and limits any possibility of chemicals sticking/harming of the pipe internal surface.

Crystal Industrial’s dual injection quills from India are basically made of Type 316 SSTL. They are intended to permit two chemicals to be infused into one port at the same time.

Standardized P/N design alternatives:

• Process fitting Size: 1/2″, 3/4″, or 1″ mnpt (- 050, – 075, and – 100,          respectively).
• High Pressure Check Valve Kits: (- CVK)
• Shutoff Ball Valves: (- BV)

Features:

• Check valve packs are alternative on the pump side attachment for      simple establishment and come configured ready for application.
• Insertion length of the internal tube is flexible, based on where the      pressure fitting is secured.
• Hex shaped body permits a wrench to be utilized amid establishment.
• This product incorporates two 1/4″ or 1/2″ pump connectors for rapid    connection of 1/4″ or 1/2″ chemical tubings.

Crystal Industrial’s Non-Retractable Injection Quill with Check Valve from India

• Accessible in 1/2″ and 3/4″ MNPT primary fitting sizes.
• Standardized pump discharge line attachment is 1/2″ MNPT.
• Incorporated spring loaded ball check valve Hastelloy® C, Alloy 20, or Stainless Steel springs accessible EPDM or Viton Seats.
• Crystal Industrial’s PVC, CPVC Injection Quills from India evaluated to 150 psi.
• Stainless Steel, Alloy 20, Titanium, and Hastelloy® C Injection Quills evaluated to 1500 psi.

Crystal Industrial’s High Pressure Injection Quills from India are utilized to infuse chemicals pumped by metering pumps into the vigorous stream area of high pressure water or steam lines. Accessible with or without check valves.

Crystal Industrial’s Injection Quills from India are utilized for insertion of water or chemicals in pipe-lines and vessels. Crystal Industrial’s Quills are placed in 2-inch access fitting, either water powered or chemical. Crystal Industrial’s Injection quills from india can be furnished with an injection nozzle. For insertion chemical supply, a 1-inch Tee is welded to the 2-inch access fitting. The strong fitting for injection quills contains openings to convey the liquid to the injection quill and injection nozzle.

Crystal Industrial’s Injection Quills from India

Crystal Industrial’s Injection Quills from India are intended to assure a consistent and fast diffusion of injection chemicals into the middle stream of an operating pipeline. This keeps corrosive fluids from sticking to the side of the pipe.

Crystal Industrial’s Injection Quills from India are accessible in various types of materials and compression ranges.
Pressure and temperature are contingent upon the material of development and fluctuate from 150 to 3000 psi and 100 °F (37 °C) and 500 °F (260 °C).

Options

With or without check valves.
Standardized lengths of 2 3/4″ for 4″ pipes.
Custom lengths to 36″ (SP).
Materials: PVC, Stainless Steel, C-20,
Kynar

Suggestions

For lines less than 4″ diameter, trim quill so chemical is discharged close to the focal point of line. Use as it is for lines more than 4″ diameter or request specific length that will diffuse the chemical close to the focal point of the pipe. Establish with “Telltale” V-indent confronting upstream so the stream strikes angled face at the end of the quill for very quick dispersal of infused chemical.

For ease of maintenance, establishment of an isolation valve, evaluated above line working pressure, exactly behind the quill is suggested.

Crystal Industrial’s Polypropylene Chemical Injection Quill from India

This injection quill is intended to work with 1/4″ or 3/8″ width hosing. Evaluated up to 100 psi, Crystal Industrial’s chemical injection quills from India are available with a Santoprene or Pellathane material inward duckbill. Product UCAK300 is made with no check valve.

Special Options:

Customized quill lengths and materials of Alloy 20 and Hastelloy are accessible upon special demand.

Crystal Industrial’s Fixed Injection Quills from India

Crystal Industrial’s Non-retractable Main Connects or Fixed Injection Quills from India will enhance the insertion and dispersion of corrosive chemicals into a piping. Additionaly, they will complete this without harming the pipeline or threaded port at the point of injection and will avoid directing of the chemical down the pipe surface.

Crystal Industrial’s Injection Quills from India
– Standardized Material of Construction

Body Material
316 Stainless Steel Spring.
Ceramic Ball.
½” mnpt Connections.
Discharge Orifice.

Standard characteristics include:

• 6 materials of manufacture.
• compression range to 3000 PSIG.
• 2 standard sizes accessible 6″or 8″.
• temperatures to 260°C (500°F).
• threaded or socket attachments.
• custom materials and sizes.
• in built spring loaded check valve accessible on demand.
• standardized 1/8″ orifice release and discretionary 1/4″ for higher               stream.
Compression range to 3000 PSIG.
Temperatures to 260ºC.
Custom materials and sizes accessible on demand.

Instructions

1. Establish Crystal Industrial’s injection quill utilizing the proper pipage compound and PTFE tape.

2. All the Crystal Industrial’s injection quills from India come standard spring assisted. It is suggested, however, if you request a quill without a spring that they be placed in the process line at a 6 o’clock position. This will aid the check valve seating.

3. 6″ length quills are suited for 4″- 6″ pipe widths. Pipe sizes lesser than 4″, the quill can be cut so that the injection quill is in the focal point of the operative pipe.
8″ length quills are appropriate for 8″- 10″ pipe diameters.

4. Establish the injection quill in the procedure so that the stamped arrow in the body is confronting downstream. This places the angle face of the quill into the operative stream, accelerating the diffusion of the chemical into the process liquid.

5. An isolation valve set up behind the Crystal Industrial’s injection quill from India is suggested for easy maintenance.

Maintenance Instructions:

Crystal Industrial’s injection quill checks are provided with parts that are easily available for maintenance.
To get the quill checks, follow the guidelines mentioned below:

Seat Removal
Crystal Industrial’s quill seat is effortlessly evacuated utilizing a standardized ratchet and drive bit.

PVC, CPVC, PP, and PVDF quill seats utilize a Torx45 drive bit.

316 Stainless Steel and Hastelloy C276 quill seats utilize a ¼” Hex-head drive bit.

Assure that the drive bit is appropriately engaged in into the seat, then gradually turn anticlock-wise to evacuate.

Re-Assembly of Crystal Industrial’s Quill Check Parts from India

• Spring – replace spring by establishing in quill check, with the small end confronting up.
• Ball – replace ball by setting up on top of spring.
• Seat – set up check seat by wrapping seat with PTFE tape, around 2 turns. Ensure that no PTFE tape strands are obstructing the seating surface that will contact the check ball.

Utilize pink PTFE tape for Stainless Steel, Hastelloy, and PVDF seats.
Utilize white PTFE tape for PVC and CPVC seat materials.
Apply a varnish of PTFE pipe sealer on the taped seat, assuring the whole surface is coated.

Replace Seat

Place seat above the ball.
Utilizing similar drive bits from Step 1, assure that the drive bit is appropriately connected to the seat and at that point gradually thread clockwise into quill body; ensuring not to cross-thread when positioning seat. Assure seat is flush with, or just beneath the surface of the quill check.

Crystal Industrial’s Retractable injection quills from India

These are gadgets that convey chemicals to a desired place inside the pipeline.
Crystal Industrial’s Retractor from India is a lightweight device effortlessly and easily operated by one individual. It gives secured and controlled injection and withdrawal of probes, sensors and insertion gadgets at compressions up to 1,500 psi.

Crystal Industrial’s Retractor from India is totally congenial with the RCS Retractable System of access fittings, probes, sensors and insertion gadgets. It is likewise congenial with a standard 1″ full port ball valve and nipple assembly.

Applications

Usually, quills are utilized when comparatively little amounts of chemicals are being transfused. This is generally done to help an equal distribution of a chemical, particularly in fluid streams. In other words, get advantage from the chemical to the maximum limit possible.

Crystal Industrial’s Retractable injection quills from India are even utilized in gas streams, yet unless there is a huge gas speed the chemical is not sufficiently distributed into the gas. A more efficient technique of inserting less quantities of chemical into a gas stream is the pneumatic atomizer or spring treated water powered atomizer. Crystal Industrial’s injection quill from India can also be used as a sampler. By setting up a testing valve on the liquid inlet, gas or fluid specimens can be taken from any required depth.

An extensive range of 5/8″ radius retractable injectors for insertion of chemicals and process examining up to 260C and 1000 psi with alternatives to 450C and 1500 psi. Standard embed tubes permit a range of quill and nozzle holder connections to be utilized.
Product descriptions may change without notice.
Thickness of sides of the tubes is 1/8″ (3.2 mm).

Security Note: Utilization of security brace assembly firmly suggested.
Applications incorporate any operating plant where treatment or inspection is executed and on-line servicing is significant. A robust, secured and easy system with a long reputation in refining and petrochemical industries.
This instrument might be established by hot tapping a prevailing line.

Crystal Industrial from India has been providing retractable quills, spray nozzles, pneumatic atomizers, corrosion coupon holders and related instruments to the piping, oil and gas generation and refining enterprises. Additionally, Crystal Industrial from India offers the capability to outline and fabricate custom instruments for unique application needs.

Crystal Industrial’s Retractable Systems from India

When you utilize Crystal Industrial’s Retractable Systems from India you can be guaranteed that you have instruments that have the below mentioned features and advantages:

1. Every unit is produced from 316SS stock. It is not configured from              standard pipe attachments or off the shelf equipment.
2. All 316SS utilized in the production is NACE MR0175/94 Standards.
3. No 316SS is utilized that has a Rockwell C hardness of more than 22.
4. Every unit is accessible in many alloys.
5. Every unit is hydrotested before delivery.
6. Every unit has an unchangeable mechanical stop as a security feature.
7. Every unit is made to keep going for years with little upkeep.
8. Security is a feature that is composed into each unit.

The LP-200 HT is effectively and securely injected to 200 PSI. The client provides the bleeder valve and nipple selected. The exact locking system permits simple injection and extraction of insertion quill shafts. Simply push down on the injection knob pressurising the injection quill to the required depth. Then fasten the locking bolt. The insertion shaft is now strongly set up in place. Once set up the LP-200 HT keeps up a low profile.

Crystal Industrial’s product variety from India includes systems for inserting chemicals into and examining from on-line operations, particularly where the AC and RC access systems as per the norms are the methods of intrusion.

Crystal Industrial’s chemical infusion and test quills from India

The infusion of chemicals and examining of process liquids are two frequent necessities for the oil and gas extraction, purifying and pipeline enterprises. Crystal Industrial’s chemical infusion and test quills from India are effortlessly insertable and removable to give these capacities while the piping or distribution system is online, without disruption. Crystal Industrial’s chemical infusion and test quills from India permit you to diffuse chemicals into a required area effortlessly and without waste.

The capacity to service this sort of instrument on-line gives a remarkable advantage, particularly in applications where quills or nozzles may be distinctly obstructed because of operative conditions or particles.

Crystal Industrial from India additionally gives a custom instrument service to fixed and retractable injection and testing apparatus where our design ability can be utilized to create project specific arrangements. These have incorporated high volume Washwater quills in exotic materials, steam blending quills for purifying applications and gas driven injectors for quick chemical distribution.

Crystal Industrial’s Injection Quills from India serve the following Industries:

Natural Gas dissemination and Dispersal.
Oil and Gas generation.
Petrochemical Processing.
Liquid Processing.
Water Treatment.
Pulp and Paper Processing.

Crystal Industrial’s Injection Quills from India for secure diffusion of chemicals into pipings

Crystal Industrial’s Injection Quills from India are utilized to give safe distribution of chemicals into pipings. The quill end ascertains the diffusion of the chemicals far from the sides of the pipe. The built-in spring loaded check valve avoids reverse flow from the pressurized pipe. A union attachment on the inlet permits easy establishment and maintenance.

Options and Benefits:

Injection quill can likewise be designed to be utilized as an in-line check valve.
Accessible in PVC, CPVC, PVDF, PP, 316 stainless steel, and different materials upon demand.
Extractable check valve seat.
Union inlet w/Viton o-ring.
EPDM o-ring choice accessible.
Standard max compressions to 150 PSI.
Temperatures to 500º F.
Inlet tubing connection choices accessible.
NPT or BSP process attachments accessible.
Quill sizes: 0.5-2″
4″ quill length standardized with adders up to 8.5″.

Crystal Industrial’s Injection and Sample Quills from India

Crystal Industrial from India is a production plant and has many layouts and configurations accessible. Injection Quills and Sample Quills are alike in layout however, one is utilized for infusing chemicals into the piping, tank or operation and the other is utilized for removing a specimen from an operative system for investigative purposes. Crystal Industrial from India has the capacity to manufacture these quills within our layout rules as per your descriptions. Customized designs and enrollments are likewise accessible. Crystal Industrial from India is capable to build, repair and modify pressure vessels, pipes and fittings as per process pipage and Category A,C,F,H fittings. Complete documentation packages are accessible for infusion and test quill products.

Specifications and Features:

Weld processes enlisted for different alloy development.
Threaded process attachments: 1/2″, 3/4″ and 1″ NPT.
Flanged process fittings 150# through 2500# raised
face, flat face and RTJ.
Piping instrument fittings: Threaded, socket weld and flanged.
Alloys: 316/316L, 304/304L, Inconel 600, Hastelloy’s,
A105 Carbon Steel, Duplex 2205, A350LF2.
Specialized coatings, for example, PTFE and Sulfinert.
Sample or Injection point can be unsealed at an angle (45° standard) or drilled openings.
Standard designs accessible along with client built layouts.

Crystal Industrial’s Injection Quills from India

Characteristics:

Exceptional apirator tip plan on injectors.
Check Valve in injectors removes backflow.
Fixed and retractable models accessible.
Ball examining material is ceramic on all models.
Ball examining springs in a variety of materials .
Fabricated in a variety of materials.

Crystal Industrial’s Fixed/Retractable Injection Quill Assemblies from India

To insert Corrosion inhibitors , Bactericides, Oxygen scavengers, Chemicals …and so forth in the line , we provide the entire injection system assembly that goes on the pipeline. These Injection systems are categorised as ‘Fixed kind’ and ‘Retractable/Recoverable kind’. The injection tube is provided with Injection Quill or Nozzle or Spray Nozzle …and so on according to the line conditions and kind of chemical. These injection systems are then set up on Crystal Industrial kind of retractable or recoverable fittings from India.

Crystal Industrial’s Chemical Injection Quill from India

Crystal Industrial’s Chemical Injection Quill/Testing Tube Assemblies from India furnished with a SM-49-PG sealing gland give a retractable method for chemical injection or process liquid testing at compressions up to 2000 PSI* and to temperatures up to 1000 F*. Transfusion of the quill can be conformed to allow injection/testing at correctly the point wanted in the process liquid. Standard lengths are accessible in 18, 24, 30, and 36 inches.
With a number of nozzle and quill designs accessible, Crystal Industrial from India can fulfil your injection prerequisites.

Crystal Industrial’s Testing systems from India

Crystal Industrial’s Testing systems from India are utilized to take sample of the process fluid or medium. Such specimens are then examined in the research facility for anticatalyst concentration levels, the presence of metal particles, oxygen levels, scale forming mixes, and an extensive variety of process parameters.

The most functional preventive maintenance techniques for reducing or curbing corrosion in product pipings, vessels, and so on., is to process the corrosive enviroments with compound inhibitors.

Utilizing the Crystal Industrial Retractable Injection Quill from India for simple, trustworthy access, inhibitors can be infused with security and effortlessly when under full working compressions. Moreover, various injection gadgets and systems can be utilized to give the most effective conveyance and distribution for a given application.

Advantages

1. Ensure fast dispersal of inserted chemicals.
2. Special aspirator tip design on injectors.
3. Check Valve in injectors wipes out back flow.
4. Fixed and retractable models accessible.

The fixed kind of insertion/testing system must be utilized in areas which can be depressurized for injection and extraction. However, examining and insertion can happen under full working conditions.

Flow direction is shown on the body to guarantee appropriate placement. Standard 3-1/4″ quill length gets attached to most pipes, however can be cut short for small diameter pipings.

Utilizing injection quills to diffuse product equally through lines or vessels incredibly enhances product execution. Our retractable and fixed quills are accessible in a range of corrosion safe alloys, can be fixed with special tips to give maximum coverage, and can be modified for particular applications.

Many procedures require infusing fluid into a gas flow. Illustrations incorporate presenting reactants, corrosion-control added substances, and water or solution to disintegrate deposits. Queries often come up on the most proficient method to do this appropriately. Both process and mechanical prerequisites set the general confinements of a particular establishment.
“The plane of injection can essentially influence execution.”
A latest example shows which elements to consider for effective fluid infusion. A plant required to infuse water to disintegrate salts being accumulated from a vapor stream onto pipings and heat exchangers. Left in position, the salts led to under-deposit erosion that made a hole in an exchanger.

Main considerations assessed for this establishment included:

• kind of infusion gadget (quill or spray nozzle);
• direction of infusion (co-stream or counter-stream);
• plane of infusion (straight or horizontal);
• stream regime or speed required for effective diffusion;
• mechanical and corrosion outcomes of infusion; and
• symmetry of downstream pipes.

Each blending job shall have its own balance of prerequisites. In any case, the selections made in this particular case are illustrative.