Crystal Industrial’s Injection quills from India:
Crystal Industrial’s variety of chemical injectors from India have been intended to infuse and appropriately atomize destructive chemicals into the turbulent flow of an operative system pipeline. Crystal Industrial’s chemical injector from India will reduce the probability of destructive chemical to develop on the walls of the pipeline. Crystal Industrial’s chemical injectors from India are suggested for use in pipings with a stream rate speed of 40 feet per second (12.192 meters per second), or less.
Infuse chemicals securely and effortlessly into mid point of the pipe
This chemical-injection quill infuses destructive chemicals into your pipeline without harming the port or pipe. Crystal Industrial’s Injection quill from India ascertains uniform dissemination of chemical in the middle of the pipe.
Stream direction is shown on the body to ascertain appropriate placing. Standard 3-1/4″ quill length connects most pipes, however can be trimmed for lesser diameter pipes.
Crystal Industrial from India has built up an additive injection quill for the petroleum industry. These injection quills can be constructed with either a retractable mounting assembly or fixed position assembly.
Utilizing Crystal Industrial’s Injection quills from India to distribute chemical uniformly through pipelines or vessels significantly enhances product execution. Crystal Industrial’s fixed and retractable quills are obtainable in a wide range of corrosion tolerant alloys, can be connected with specialty tips to give optimal coverage, and can be modified for particular applications.
Crystal Industrial’s Injection quills from India will help distribute the additive into your product line assuring the highest possible mixing coefficient. Our self-made quills are produced to give a reliable and simple to introduce injection quill for our entire additive injection systems.
Crystal Industrial’s Injection and Sampling System is a fixed-length, 3/4″ NPT pipe plug-mounted unit usually utilized as a part of field and factory applications. Close down or isolation of process is required for establishment and scrutiny. The unit assembly comprises of an injection rod, a welded pipe connection, and an injection/examining tip. The injection tip, which is welded, threaded, or machined to the tip of the rod, can be either a quill, open, top and center, or nozzle assembly kind. Injection length (I.L.) is computed to the tip of the rod and depends on a client determined length. The standard pipe plug is the 3/4″ NPT pipe insert, though other alternatives are obtainable.
Crystal Industrial’s Injection Quill Exclusive Features
- Equally diffuses the additive over the fuel line.
- Significantly enhanced dissemination of Fuel Additives over the pipeline.
- Simple to establish, simple to expel from the line without drain down and no service required.
- Field tested with numerous additives, line compressions and so forth.
- Input additive line, Swage-Lock, English/metric connection up to ½” (12mm).
- Authorized check valve rules out any possibility of reverse flow.
- Special aspirator tip outline on injectors.
- Check Valve in injectors prevents reverse flow.
- Fixed and retractable models acquirable.
- Ball check material is ceramic on all models.
- Ball check springs in a variety of materials.
- Produced in a wide variety of materials.
Specifications
- Material: 304/L SS and 316 SS.
- Part Number: 441-215.
- Fitting: 2″ ANSI B16.5 #150 Flange.
- Authorized Check valve avoids reverse flow.
Injection Quills: Industries
- Natural gas conveyance and distribution.
- Oil and Gas Generation.
- Water Treatment.
- Petrochemical Processing.
- Pulp and Paper Processing.
- Liquid Processing.