Utilizing Crystal Industrial’s injection quills from India to diffuse product uniformly through lines or vessels incredibly enhances product performance. Crystal Industrial’s retractable and fixed injection quills from India are accessible in a range of corrosion tolerant alloys, can be fitted with special tips to give maximum coverage and can be modified for particular applications.
Crystal Industrial’s Injection Quills from India
A variety of chemical injection valves intended to give chemical distribution far from pipe sidewall, enhances blending and helps to decrease pipeline corrosion. Accessible in many styles with four body materials, PVC, polypropylene, PVDF and 316 stainless steel.
Description
Crystal Industrial’s injection quills are intended to infuse chemical into the middle stream of process to give a more homogeneous blend in the pipeline.
- Accessible in PVC, PP, PVDF and 316 SS.
- Two sizes: 6″ and 8″.
- In-built spring loaded check valve.
- 1/4″ orifice for greater flow capacity.
- Stainless steel spring as standard, Hastelloy “C” accessible as an alternative.
- Pressure rating to 3000 PSI (316 SS).
- Temperatures to 260ºC (316 SS).
Crystal Industrial’s Stainless Steel Injection Quills from India
Description
A variety of stainless steel injection quills in standard, retractable and thermal sink versions. All incorporate shut off valve, non return valve and acknowledge standard LMI injection valve.
Infuse Quills for safe conveyance of chemicals into pipelines
Crystal Industrial’s Injection Quills from India are utilized to give safe transfer of chemicals into pipelines. The quill end assures the distribution of the chemicals far from the pipe sidewall. The built-in spring loaded check valve keeps reverse flow from the pressurized pipe if there is a crack in the discharge piping. A joined fitting on the inlet permits simplicity of establishment and upkeep.
Alternatives and Benefits:
Crystal Industrial’s Injection quill from India can likewise be arranged for use as an in-line check valve.
- Accessible in PVC, CPVC, PVDF, PP, 316 stainless steel, and various materials upon demand.
- Extractable check valve seat.
- Union inlet w/Viton o-ring.
- Alternative EPDM o-ring accessible.
- Standard maximum pressures to 150 PSI.
- Temperatures upto 500º F.
- Inlet tubing connector alternatives accessible.
- NPT or BSP process fittings accessible.
- Quill sizes: 0.5-2″.
- 4″ quill length standard with adders up to 8.5″.
- Three materials of manufacture are accessible to give congeniality with majority of chemicals.
- Elongated versions accessible for bigger diameter pipings up to 36 inches.
- Disseminates chemical product into fluid, gas, or mixed streams.
- Decreases contact of concentrated chemicals with pipe or tank surfaces.
Crystal Industrial’s injection quill from India is utilized to equally distribute fluid chemicals into pipelines. At the point when appropriately established, Crystal Industrial’s injection quill from India inserts the chemical treatment into the bulk of the liquid, avoiding probable localized corrosion or disintegration.
The standard length Crystal Industrial’s injection quills from India are made for pipings of 6 inch diameter or less. Ordinarily the augmented Crystal Industrial’s injection quills from India are field cut to place the stinger in the focal point of the pipeline and might be slotted for steam or gas streams.
Crystal Industrial’s injection quills from India are made for improved corrosion tolerance and mechanical power when inserting corrosive products, for example, concentrated sulfuric corrosive, which releases heat when diluted.
Highest Pressure: 3,000 psi, 150 psi for Kynar.
Highest Temperature: 500ºF metal, 200ºF Kynar.
Crystal Industrial’s injection quills from India are utilized to infuse a chemical product in a stream. By reaching the focal point of the stream, injection quills ensure a consistent and effective mixing of the components.