Crystal Industrial’s Low pressure Access Fitting Assembly from India
It comprises a sequence of two nipples, a 1″ ball valve, a stuffing box with sealing gland, and a mechanical bolt to protect the probe while being used. A nipple and the ball valve are joined to the pressure system permanently by method of the nipple mating with a suitable 1″ Threadolet outlet. The stuffing box and bolt nut includes packing set and shaft packing, which when compacted by the locking nut, safely bolts the probe/holder.
Crystal Industrial’s 1″ Low Pressure Retractable Injection Tube from India
Descriptions
• Mounting — 1″ Full Port Valve Minimum.
• Temperature Rating — +500° F/+260° C.
• Pressure Rating — 1500 PSI.
• Tube Material – 316SS.
• Seal Material – Teflon.
The Crystal Industrial’s 1″ low pressure retractable Injection system from India is configured for low pressures and average temperatures of up to 1500psi and 230ºC, utilizing a minimal one inch piping/vessel outlet. Where the access system needs comparatively few observation points, this system gives a financially viable option to Crystal Industrial’s higher pressure system. Like the higher ranked system, the Crystal Industrial’s Model 600 from India allows secured, simple transfusion and withdrawal of different corrosion and abrasion checking gadgets and in addition preventive upkeep type gadgets – all while under line working pressure. A retractor operated with hand is needed for secured control of the probe. An entire line of apparatus of corrosion and abrasion checking is accessible.
Make certain to choose and request a suitably measured Threadolet as per the pipe size. Crystal Industrial’s Flanged Threadolet from India are accessible on special request and in addition the 1″ flanged ball valve and flanged stuffing box. Crystal Industrial’s Injection / Sampling Assemblies from India give a retractable method for chemical insertion or process liquid sampling at compression up to 1500 psi and temperatures up to 260°C. Inclusion of tube can be adapted to allow insertion / sampling at exactly the desired location with the process liquid.
Standardized lengths are accessible in 18, 24, 30 and 36 inches. The 1/2″ female NPT on the operative side of the injection tube permits you to place a quill or select from different nozzle designs to meet your injection necessities.
Crystal Industrial’s PVC and CPVC Injection Quills from India
Crystal Industrial’s PVC and CPVC Injection Quills from India give extensive chemical compatibility for various water and industrial chemical utilizations. These quills can be utilized with most acidic and base solutions, and numerous chemicals comprising chlorine and ammonia.
PVC is a very good all-around material up to roughly 130°F.
CPVC can give considerable similar properties as PVC up to around 180°F. Under a few conditions, CPVC can become weak as it ages, so PVC is suggested unless higher temperatures are existing.
Utmost pressure: 150 psi
Crystal Industrial’s Kynar Injection Quills from India
Kynar gives very good chemical resistivity properties up to around 225°F.
Utmost pressure: 150 psi
Advantages
Crystal Industrial’s quills from India are manually insertable (low compression) or mechanically injectable (high compression) into your pressurized system. With an extensive variety of weight evaluations accessible, Crystal Industrial’s quills from India are the ideal selection for checking and securing most pressurized applications. They can be set up in any location with elongated injection lengths of up to 20 feet for difficult to access application circumstances. Crystal Industrial’s STV-T Series injection instruments are utilized for mechanically implanting the quill shafts.
Features
- Process pressure bleeder valve.
- Licensed fastening collet securely protects the shaft inside the process flow until discharged by the administrator.
- Incorporated security top or chain, contingent upon model.
- 45-degree angle with crosscut face.
- Configured and fabricated as per ASME B31.3.
- Process wetted parts abide by NACE MR0175/2009 and are appropriate for service in hydrogen sulfide (H2S) atmospheres.