Crystal Industrial’s Dual Injection quills from India to infuse two chemicals into one port simultaneously

Crystal Industrial’s Dual Port Injection Quill from India

These dual port chemical injection quills are specifically intended to assure a more even and quick diffusion of TWO chemical infusions into one port. This permits the chemicals to be inserted close to the focal point of the operative stream pipe and limits any possibility of chemicals sticking/harming of the pipe internal surface.

Crystal Industrial’s dual injection quills from India are basically made of Type 316 SSTL. They are intended to permit two chemicals to be infused into one port at the same time.

Standardized P/N design alternatives:

• Process fitting Size: 1/2″, 3/4″, or 1″ mnpt (- 050, – 075, and – 100,          respectively).
• High Pressure Check Valve Kits: (- CVK)
• Shutoff Ball Valves: (- BV)

Features:

• Check valve packs are alternative on the pump side attachment for      simple establishment and come configured ready for application.
• Insertion length of the internal tube is flexible, based on where the      pressure fitting is secured.
• Hex shaped body permits a wrench to be utilized amid establishment.
• This product incorporates two 1/4″ or 1/2″ pump connectors for rapid    connection of 1/4″ or 1/2″ chemical tubings.

Crystal Industrial’s Non-Retractable Injection Quill with Check Valve from India

• Accessible in 1/2″ and 3/4″ MNPT primary fitting sizes.
• Standardized pump discharge line attachment is 1/2″ MNPT.
• Incorporated spring loaded ball check valve Hastelloy® C, Alloy 20, or Stainless Steel springs accessible EPDM or Viton Seats.
• Crystal Industrial’s PVC, CPVC Injection Quills from India evaluated to 150 psi.
• Stainless Steel, Alloy 20, Titanium, and Hastelloy® C Injection Quills evaluated to 1500 psi.

Crystal Industrial’s High Pressure Injection Quills from India are utilized to infuse chemicals pumped by metering pumps into the vigorous stream area of high pressure water or steam lines. Accessible with or without check valves.

Crystal Industrial’s Injection Quills from India are utilized for insertion of water or chemicals in pipe-lines and vessels. Crystal Industrial’s Quills are placed in 2-inch access fitting, either water powered or chemical. Crystal Industrial’s Injection quills from india can be furnished with an injection nozzle. For insertion chemical supply, a 1-inch Tee is welded to the 2-inch access fitting. The strong fitting for injection quills contains openings to convey the liquid to the injection quill and injection nozzle.

Crystal Industrial’s Injection Quills from India

Crystal Industrial’s Injection Quills from India are intended to assure a consistent and fast diffusion of injection chemicals into the middle stream of an operating pipeline. This keeps corrosive fluids from sticking to the side of the pipe.

Crystal Industrial’s Injection Quills from India are accessible in various types of materials and compression ranges.
Pressure and temperature are contingent upon the material of development and fluctuate from 150 to 3000 psi and 100 °F (37 °C) and 500 °F (260 °C).

Options

With or without check valves.
Standardized lengths of 2 3/4″ for 4″ pipes.
Custom lengths to 36″ (SP).
Materials: PVC, Stainless Steel, C-20,
Kynar

Suggestions

For lines less than 4″ diameter, trim quill so chemical is discharged close to the focal point of line. Use as it is for lines more than 4″ diameter or request specific length that will diffuse the chemical close to the focal point of the pipe. Establish with “Telltale” V-indent confronting upstream so the stream strikes angled face at the end of the quill for very quick dispersal of infused chemical.

For ease of maintenance, establishment of an isolation valve, evaluated above line working pressure, exactly behind the quill is suggested.

Crystal Industrial’s Polypropylene Chemical Injection Quill from India

This injection quill is intended to work with 1/4″ or 3/8″ width hosing. Evaluated up to 100 psi, Crystal Industrial’s chemical injection quills from India are available with a Santoprene or Pellathane material inward duckbill. Product UCAK300 is made with no check valve.

Special Options:

Customized quill lengths and materials of Alloy 20 and Hastelloy are accessible upon special demand.